Label Winding Guide

Take a look at our handy guide to know which label winding to use on our machines.

All labels to be outside wound with a 3mm minimum label gap and Ø76mm internal core

RHEL = right hand edge leading

LHEL = left hand edge leading

Machine direction is from operator position looking at the front of the machine

IMPORTANT NOTICE: THIS GUIDE IS SOLELY TO DEMONSTRATE WHICH LABEL WINDING DIRECTION IS REQUIRED. WE ARE NOT RESPONSIBLE FOR THE ORIENTATION OF ARTWORK ON THE PRODUCT. ARTWORK ORIENTATION SHOULD BE DISCUSSED WITH YOUR LABEL SUPPLIER BUT PLEASE CONSULT US DIRECTLY FOR ASSISTANCE.

In this example, the front label head (closest to operator position) would use a LHEL label

The rear label head (furthest from operator position) would use a RHEL label

In this example, the front label head (closest to operator position) would use a RHEL label

The rear label head (furthest from operator position) would use a LHEL label